Planning Curtain Pocket Dimensions

Why it matters at project stage

An undersized pocket can compress fabric, expose the track or make a motor connection inaccessible; an oversized pocket can disturb ceiling proportions. Set it from a resolved system section.

The curtain track, pocket and ceiling build-up form one detail. A dimension set without the fabric layers, motor, opening lights and nearby furniture can leave insufficient movement or service clearance.

Information required

Use the confirmed system, track count, fabric layers and fullness, motor and accessories, wall and glazing offsets, skirtings, service access and finished levels.

There is no universal curtain-pocket size. Width and depth depend on the selected track, fabric, heading and motor accessories, while the project and installation teams must confirm the fixing substrate.

Reaching a project decision

Dimension the pocket from the approved product section rather than an assumed system. Position the centreline so the fabric can move without rubbing against glazing or adjacent finishes.

Use “Is the system confirmed” and “Is there space for every layer” as decision gates for this subject. Compare any viable alternatives against those two project-specific questions, then document why the selected approach answers them.

Coordination through delivery

The ceiling contractor confirms void and finish, the curtain specialist confirms system requirements, and the electrical team confirms motor connections before ceiling closure.

Show the track centreline, wall offset, finished level and access direction clearly. Check air-conditioning, radiators, furniture and other obstructions on site before production.

Before handover, resolve “Does the motor fit” and “Is fabric clear of the glazing” with the named project parties. Record the answer under the relevant opening or room reference so a later site, material or programme revision can be assessed against the correct approval.

Recording and verifying the decision

For planning curtain pocket dimensions, the approval record should identify the opening or room, current drawing revision, responsible party and date. Attach the dimensions, samples or system information needed to evidence “Is service access open”; mark superseded decisions explicitly rather than relying on verbal instruction.

The release checklist for this guide is: Is the system confirmed; Is there space for every layer; Does the motor fit; Is fabric clear of the glazing; Is service access open. Any unanswered point remains an action with a named owner and decision date, not an assumed instruction to proceed with production or installation.